Back to Top

Home > Products > GigaAccel 180 Specs

The PowerXCell 8i Board “GigaAccel 180”

Specifications

yaji  Specs    yaji  Qualified / Verified Workstations

Microprocessor

IBM PowerXCell™ 8i
Number of Processors Chips 1
Processor Internal clock speed 2.8GHz
Processor Memory interface speed 800MHz
Processor I/O interface speed 5.0GHz
PPU processors 1
SPU processors 8

Main memory

Memory 4GB DDR2 DRAM
Channels 2
Data path 16bytes per channel
Transfer rate 800Mbps
Bandwidth (Maximum,Total) 25.6GB/s (with 5-5-5 timings)
ECC Yes

Cell companion chip

Type IBM Southbridge DD3.0
Transfer rate 10GB/s at 2.5GHz (5GB/s each direction)

I/O

1 x 16 PCI Express bus
2 x 1 gigabit Ethernet

Software

Booting by IBM boot firmware
Network booting (Linux booting with no disk)
Official support OS : Yellow Dog Enterprise Linux 6.x (optional)
SDK : Cell SDK for GigaAccel 180 (optional)
  • Integrated Development Environment
  • Performance tools
Driver : PCIe driver compatible

External Dimensions

Length 111mm
Width 312mm
*Doublewide box with fan heatsink

Operating environments

External temperature 0 to 40ºC (32 to 104ºF)
Relative Humidity 5 to 95% RH (non-condensing)
Altitude -400 to 3000m

Power consumption

150W

Qualified/Verified Workstations

Qualified Workstation

Vendor Model
Lenovo ThinkStation S10

Verified Workstation

Vendor Model
IBM IntelliStation Z Pro 9228
HP xw9400
HP xw8600
Lenovo ThinkStation D10
*Verification are based on our system tests. We do not warrant in every environment even if it was verified to work on your model.

GigaAccel 180 related inquiries